Leading Sources of Construction Accident Injuries

Spencer Law Group Sept. 3, 2019

Of the 203,500 recorded injuries and illnesses suffered by workers in the construction industry in 2016, over 40% of them involved workers missing days away from work. Those 82,760 injuries and illnesses resulted in 22,880 sprains, strains and tears, 13,020 incidences of soreness or pain, 11,880 fractures, and 11,810 cuts, lacerations and punctures.

The median time away from work after suffering an injury or illness on the job in construction is 10 days. Of the 82,760 accident injuries involving days of work missed, only 14.1% involved only one day away from work.

On the other end of the spectrum, 26,010 accident injuries involved 31 days or more away from work, which works out to nearly a third of all accident injuries requiring days away from work. That’s a massive amount of lost productivity due to injuries and illnesses.

In order to better understand and prevent future injuries, we’re going to look at the top sources and events that lead to accident injuries on the construction site and some tips on how to avoid them.

Note: Data is based on the Bureau of Labor Statistics’ 2016 Survey of Occupational Injuries and Illnesses for nonfatal occupational injuries and illnesses involving days away from work.

Top 5 Sources of Construction Accident Injuries or Illnesses

1. Parts and Materials – 16,460 cases in 2016 (up from 14,240 cases in 2015)

Building materials (9,020) were the leading source of construction accident injuries in this category with structural metal materials (2,510), pipes, ducts and tubing (1,950) wood and lumber (2,380) and brick, blocks and structural stone (1,340) being the main culprits.

Fasteners (1,700) like nails and screws were another major source of accident injuries. As were electric parts (1,270) which covered everything from building wiring and switchboards to generators and powerlines to power and extension cords.

Safety Tips:

  • Always wear personal protective equipment (PPE) such as hardhats, safety glasses, gloves and steel-toed boots

  • Be mindful of your surroundings and those around you when moving materials around the jobsite

  • Employ lockout/tagout procedures and depower equipment when not in use or making repairs

2. Worker Motion or Position – 10,500 cases in 2016 (down from 11,010 cases in 2015)

These are self-inflicted accident injuries where the worker has hurt themselves which was caused by the position they were in or by a bodily motion such as walking, climbing, bending, reaching, twisting, etc.

Safety Tips:

  • Limber up by stretching before you begin your shift

  • If possible, try sitting rather than squatting or kneeling when performing work

  • Don’t overextend or make sudden movements to avoid strains or sprains

3. Floors, Walkways or Ground Surfaces – 9,720 cases in 2016 (up from 8,540 cases in 2015)

Walking surfaces like the ground (3,460), floors (2,780), stairs, steps and escalators (780) and parking lots (530) can be dangerous especially on construction sites where they can be uneven or irregular.

Safety Tips:

  • Watch where you’re walking and wear non-skid footwear to avoid slipping on surfaces

  • Be mindful of any tripping hazards or uneven surfaces

  • Clean up any spills or material waste and keep walking areas clear at all times

4. Hand Tools – 8,490 cases in 2016 (down from 9,640 cases in 2015)

Powered hand tools (4,390) were the source of more construction accident injuries than nonpowered hand tools (3,710).

Striking tools (1,220) like hammers and cutting tools (1,180) like knives and boxcutters were some of the leading sources of nonpowered hand tool injuries.

For powered hand tools, boring tools (1,090) like drills (1,030), cutting tools (1,280) like power saws (1,200), and striking tools (1,310) like jackhammers (690) and nail guns (530) were the major sources of construction accident injuries.

Safety Tips:

  • Use the proper tool for its designated purpose

  • Inspect all hand tools to ensure they are in good working order

  • Always wear gloves and other PPE when using hand tools

For more tips on hand tool safety, check out Construction Safety: Working With Hand & Power Tools.

5. Ladders – 7,140 cases in 2016 (up from 6,800 cases in 2015)

Ladders are a handy tool on the construction site. If not used properly, they can easily lead to fall and other injuries.

Safety Tips:

  • Select the right ladder for the job and make sure it is properly secured before each use

  • Always maintain three points of contact when climbing

  • Tools and materials should be carried by hand when climbing a ladder

source: Construct Connect